1. IMPORTANT:
    We launched a new online community and this space is now closed. This community will be available as a read-only resources until further notice.
    JOIN US HERE

[v1.5.0] MASCHINE MK3/MIKRO MK3 Ableton Live 11 MIDI Remote Script (Unofficial)

Dieses Thema im Forum "MASCHINE Area" wurde erstellt von Elton Memishaj, 1. März 2021.

  1. dreysi.au

    dreysi.au New Member

    Beiträge:
    3
    You really picked up a dropped ball and ran with it, greatly improving my quality of life with this nice piece of hardware.
     
    • Like Like x 1
  2. Sensei Woogie

    Sensei Woogie New Member

    Beiträge:
    3
    Hey Elton,

    I purchased the Template a few months back and I just had to wipe my computer. Is there any way you can send me the zip file to my email? You have by the far the best option available for Maschine and Ableton Integration.
     
  3. Elton Memishaj

    Elton Memishaj NI Product Owner

    Beiträge:
    195
    Hello,

    Thank you for your kind appreciation.

    Please, can you try downloading the v140 version of the script (zip) from Gumroad.

    You can find your purchased products on your Gumroad account.

    If you have troubles finding it, please send me your email which you used for the purchase and I will email you with the script zip file.

    Thanks again,
    Elton
     
  4. Sensei Woogie

    Sensei Woogie New Member

    Beiträge:
    3
    Hey Elton,

    Yes, I'm having a hard time finding it. I used either jaradwright@soundsnobmedia.com or audio@mixedbyjarad.com. The purchase was made on June 28, 2021, in the amount of $20. I no longer have access to the soundsnobmedia email so if you wouldn't mind sending it to audio@mixedbyjarad.com I would greatly appreciate it.

    Thanks,

    Jarad Wright
     
  5. Elton Memishaj

    Elton Memishaj NI Product Owner

    Beiträge:
    195
    Hello,

    I will send the zip as soon as possible today or tomorrow.

    I will let you know here in the forums, at the time I send it.

    Thanks.
     
  6. Sensei Woogie

    Sensei Woogie New Member

    Beiträge:
    3
    Thank you so much for the quick responses. Greatly appreciated it! Native Instruments needs to hire you or contract you or something man. You've blessed every Maschine user.
     
    • Like Like x 1
  7. Elton Memishaj

    Elton Memishaj NI Product Owner

    Beiträge:
    195
    Hello,

    I just sent you an email with the zip file.

    Sent it to: audio@mixedbyjarad.com

    Thank you so much for your sincere appreciation!
     
  8. jcoxy12

    jcoxy12 NI Product Owner

    Beiträge:
    21
    Would this script work with a full Mk3 not micro? This one looks better than the real one they released
     
  9. Elton Memishaj

    Elton Memishaj NI Product Owner

    Beiträge:
    195
    Hello,

    The features of this script work for the MK3 as well.

    I have not test it as I do not own the MK3, but I have received test results and positive feedback from other users.

    You should use the MK3 controller editor template (not mikro) that is provided together with the script.

    Please let me know if you have any issues.
     
  10. Elton Memishaj

    Elton Memishaj NI Product Owner

    Beiträge:
    195
    Hello,

    I hope everyone is doing great.

    If anyone is experiencing issues on MK3 (not MIKRO MK3) related to pad colors not lighting up on different modes, please reapply the attached template in this post (and also on the first post of this thread) on the Native Instruments Controller Editor software for your hardware.

    Make sure to run the Controller Editor software as an Administrator, in order to prevent losing changes or configuration after closing the software or restarting your computer.

    Thank you and stay tuned for the upcoming release with new features and fixes in a couple of months.

    Best regards,
    Elton
     

    Anhänge:

    • Like Like x 1
  11. Eivind Finsrud

    Eivind Finsrud New Member

    Beiträge:
    1
    Finally I can use my Mikro 3 with Ableton :)
    Great work on the script, Elton!
    Really looking forward to the update/manual.

    Eivind
     
    • Like Like x 1
  12. Elton Memishaj

    Elton Memishaj NI Product Owner

    Beiträge:
    195
    Thank you so much for your appreciation!

    It is been very quiet the past few weeks here on this forum thread, as I have been very busy with my job.
    I hope to finish and then continue to work on the new update and manual/tutorials for this script.
     
  13. Jackie Chan

    Jackie Chan New Member

    Beiträge:
    11
    Thank you, this is awesome Native should really think about hiring you. To anyone sceptical about downloading, it works perfectly fine and is worth the money. If your like me an just spent hours searching the internet to find out Native hasn't included this feature most likely due to the maschine vst, here's your answer :)
     

    Anhänge:

    • Like Like x 1
  14. Elton Memishaj

    Elton Memishaj NI Product Owner

    Beiträge:
    195
    Thank you so much Jackie! I love your kind appreciation!!!

    I am very glad, please stay tuned for the upcoming release v1.5.0 and manual, tutorials and videos during this autumn/winter.
     
    • Like Like x 1
  15. MATAKAO

    MATAKAO NI Product Owner

    Beiträge:
    293
    Hello Elton, any news about the next V.5 and manuals or any shortcuts/key commands sheets ? Thanks for you works about that Mikro mk3 script that NI doesn't (wtf?!). You deserve a gold medal;) for sure ! Best
     
    • Like Like x 1
  16. Elton Memishaj

    Elton Memishaj NI Product Owner

    Beiträge:
    195
    Hello, thanks a lot!

    I planned my self a deadline to be the September / October of this year for the update and manual, however I am still in the development and resolving some issues due to some changes, but I think I must focus more on the manual which is actually more important.
    I hope that this gives a brief overview about the upcoming roadmap, I hope that my load on my job, currently, to be more stable in order to allow more time for me to develop this script.

    I thank you all for your kind patience.

    Thanks!!
     
    • Like Like x 4
  17. MATAKAO

    MATAKAO NI Product Owner

    Beiträge:
    293
    Hi Elton; Great news, thanks for the roadmap, I'm looking forward to discover everything about this new update. Take care. Best
    Mat'
     
    • Like Like x 1
  18. DeepThumb

    DeepThumb NI Product Owner

    Beiträge:
    188
    Hello Elton,
    Knowing the high quality and your high expectations concerning your dev work and output patience is not a problem at all.
    I'm really looking forward 1.5x!
     
    • Like Like x 2
  19. Jackie Chan

    Jackie Chan New Member

    Beiträge:
    11
    I second this!
     
    • Like Like x 1
  20. Degreez

    Degreez New Member

    Beiträge:
    3
    Hi Elton.
    is your template MAC compatible?
    Did you release a video of all the features yet?

    Cheers
    Frank