Velocity macro - Play series

Hi,

Probably an extremely dumb question but does anyone know how to deactivate the velocity step sequencer in the NI Play Series macro controls? As soon as I activate macros to use other sequencers, the velocity step sequencer gets activated and I can't seem to stop it. Initializing the sequence again from the options menu doesn't work, nor do any of the vel. gate or other step features. I must be missing something there?

Thanks in advance.



O

 

Set all velocities to max, enable scale by velocity and now it should work as expected. But I'm right now not on my PC but can have a deeper look later.


Uwe

 

Thanks, but unfortunately no dice. Even if velocity steps are set to max with scale velocity enabled it won’t stop once it has started.

 

ok i tried, my method works, at least for me and yes the sequencer then still runs but has no impact.
Anyway, you just press the button i marked with a red dot\line under it, then it´s even not running anymore, thats the correct way of disabling the sequencers.
By the way, this is a great instrument, hope you have as much fun as i do with it.

Uwe

 

Thanks again for the quick responses. I agree that the button you highlighted will disable the sequencers, but it disables *all* sequencers. Is it not possible to just disable the velocity one?

 

Like i described above it works, i only missed to mention that you have to set gate to max. Otherwise it could end up with a kind of stutter FX. And layer Routing must be set to A+B.


Uwe