1. IMPORTANT:
    We launched a new online community and this space is now closed. This community will be available as a read-only resources until further notice.
    JOIN US HERE
NOTICE:

Our Traktor Pro Public Beta is available again in our new online community. Join us if you want to try new features.

MORE INFO

Wooo! here we go! new traktor [all the crazies up in here]:D

Discussion in 'TRAKTOR PRO / TRAKTOR SCRATCH PRO' started by DjKurtCocaine, 11/1/11.

Thread Status:
Not open for further replies.
  1. DjKurtCocaine

    DjKurtCocaine Forum Member

    Messages:
    37
    check it out! http://www.youtube.com/watch?v=xbcXbWgX6NM
    will we see anything at NAMM?
    i'm still in shock, wasn't expecting a video from NI :D
    lets get the good old detective style thread going:p

    edit, on closer inspection:
    looks like a new interface, not sure about the x1's?

    on the traktor side it looks like serato wave form feature, better HID with the CDJ's (i'm just guessing with that one cus of the bit where the time code calibration thing usually is, unless that's a standard thing and i've just missed it lol

    and then i'm just guessing standard S4 features
     
  2. malzfreund

    malzfreund NI Product Owner

    Messages:
    2.495
    Woot!

    Vid confirms that a new audio interface is on the way. We also see the new and upcoming version of TSP with sample decks.
     
    Last edited: 11/1/11
  3. im2

    im2 Forum Member

    Messages:
    45
    the "new traktor technology" is a new audio interface (WHY?) and an upgrade of TSP to incorporate S4 features (YES!)
     
  4. malzfreund

    malzfreund NI Product Owner

    Messages:
    2.495
    why a new audio interface? because we need an additional channel to handle the sample decks. at least, that would be my guess...
     
  5. DjKurtCocaine

    DjKurtCocaine Forum Member

    Messages:
    37
    in that case the new interface suggests 4 deck + 2 sample decks instead of the 2/2 we've seen on the S4
     
  6. Atomisk

    Atomisk Forum Member

    Messages:
    72
    The sample decks replace C & D, if I'm not mistaken. Seems like you could use the sampling features with the same amount of software.
     
  7. im2

    im2 Forum Member

    Messages:
    45
    Couldn't this be done with AUDIO 8 DJ ?
     
  8. lethal_pizzle

    lethal_pizzle NI Product Owner

    Messages:
    10.599
  9. malzfreund

    malzfreund NI Product Owner

    Messages:
    2.495
    My thought was like 4 regular decks plus the sample decks (which are all being routed through the same channel). So you need 5 channels total. I realize they're using just two regular decks in the vid but, after all, they're playing together or B2B or something. It's pure speculation and I well might be completely off ;)
     
  10. lethal_pizzle

    lethal_pizzle NI Product Owner

    Messages:
    10.599
    If you need 4 timecode decks plus 8 sample decks then you'll need additional arms, not just a new soundcard
     
  11. im2

    im2 Forum Member

    Messages:
    45
    Replacing a traktor 4-deck layout with a 2-deck-2-sample layout is nonsense! :p
    I can still use DECK A+B for regular tracks and load samples/loops in C+D ... There must be something else!
     
  12. Miloopa Kid

    Miloopa Kid NI Product Owner

    Messages:
    317
    Octopus D.j. :p
     
  13. lethal_pizzle

    lethal_pizzle NI Product Owner

    Messages:
    10.599
    Maybe 4 channels Traktor + Maschine out?
    Or 4 channels + mic
    Or 4 channels + Maschine hardware passthrough from Maschine to Traktor
    --
    Oh I don't know
     
    Last edited: 11/1/11
  14. chilly

    chilly Returning Customer

    Messages:
    3.138
    titties
     
  15. paulmac

    paulmac NI Product Owner

    Messages:
    168
    how would u think we would control the sample decks then? if you dont have an s4 i mean? a new mapping for the kontrol x1's? i use a vestax vci-100se and also have to kontrol x1's...hope it can all be done with what i have already..
     
  16. im2

    im2 Forum Member

    Messages:
    45
    Yes, with X1. The video gives us the answer on how we would control the sample decks.

    I hope NI will build functionality around the existing hardware....
     
  17. Hetchbend

    Hetchbend NI Product Owner

    Messages:
    1.910
    we know already that it will be Audio 6 DJ and Audio 10 DJ.

    what i think (not guaranteed to be true):
    Audio 10 DJ: the same 4 Channel inputs but 6 Channel outputs 2 additional outputs for the 2 additional sample decks

    whoever owns audio8DJ will be capable of DJing with 2 normal decks and 2 sample decks .....

    i hope you understand what i'm talking about.

    Conclusion:
    The new interfaces are the same chipsets with 2 additional stereo outputs for additional sample-decks in the software. Wether Duo or Pro :)
     
  18. lethal_pizzle

    lethal_pizzle NI Product Owner

    Messages:
    10.599
    Of course you'll be able to map the sampler. That's why I've got a Nanokontrol.
    ---
    @Hetchbend...so you're planning on buying a 6 channel mixer then?

    oh & your maths doesn't work for the 'TA 6'!
     
  19. chilly

    chilly Returning Customer

    Messages:
    3.138
    I think every new item that gets announced comes with a free pizza. It's friggin OBVIOUS
     
  20. lethal_pizzle

    lethal_pizzle NI Product Owner

    Messages:
    10.599
    Yep. With pineapple on
     
Thread Status:
Not open for further replies.