This page is available in English only

Block - Hi-Hats 1.0

Hi-Hat Generator and LFSR Noise Source

(13 Votes)
1.0 (Updated 5 years ago)
October 10, 2015
Reaktor 6


Another Block in Michael Hetrick's "Euro Reakt" series! After a marathon of sequencing tools and trigger modifiers, here's an immediately useful sound source.

Takes in two triggers (HH GATE and OH GATE) and produces two "hi-hat" drum sounds (HH - Closed Hi-Hat, OH - Open Hi-Hat). To produce a hi-hat sound, two sound sources are used. The first is a Low-Frequency Shift Register. This produces a random 8-bit noise tone. The second is a stack of tuned square waves. These are mixed together and then multipled by a simple decay envelope.

Many outputs are provided, meaning that this can be used for much more than a drum source!

HH GATE - A positive signal on here will trigger the closed hi-hat sound.
OH GATE - A positive signal on here will trigger the open hi-hat sound.

OUT - Both drum sounds will appear here.
HH - Closed hi-hat only
OH - Open hi-hat only
NOISE - LFSR noise, post-filter
SQUARE - Stacked squares, post-filter
MIX - NOISE + SQUARE, post-crossfade.

FREQ - Determines the frequency of the shift register, changing the overall timbre of the noise. Also determines the pitch of the stacked oscillators.
CUTOFF - Determines the cutoff of the high-pass filter on the noise source, and the band-pass filter on the stacked oscillators.
XFADE - Crossfade between the noise source and the stacked oscillators.
DECAY - Determines the decay time of the exponential decay envelope for the open hi-hat sound only. At minimal settings, this can be used to produce hits that are even shorter in length than the closed hi-hat.
OUT - Output level for the MIX output.
606/110 - Chooses the frequency spacing for the stacked oscillators.
x1/x2 - Chooses how loud the output can get.


Artem Moroz
9 months ago
Thank You VerY MUCH!!!
Jay Scott
5 years ago
So cool. Just spent an hour making hh grooves!
Paul Weber
5 years ago
Reply to myself - for some reason I wasn't modulating correctly. This is a helluva funky groove machine! :-))))
Paul Weber
5 years ago
Cool trick - great sound!! One conceptual question tho': does it make sense to use all these resources to produce just a HH instrument?
Brett Lavallee
5 years ago
It has a bold, unique tone. Your work paid off.
Michael Hetrick
5 years ago
Glad to hear it! I'm super self-conscious about this one. I know people are really, really picky about their drum tones. Also, this is my first sound-generating block (not counting noise sources ported directly from SuperCollider code). I spent a few hours doing research on how some of the classic drum-machines did it, and then another two hours just tweaking knob ranges and whatnot. Big shout-out to Olivier at Mutable Instruments for making his Braids code open-source (, as I ended up using his stacked oscillator tuning table for the 606 model.
Brett Lavallee
5 years ago
Sounds awesome and the alternate outputs are interesting. Thanks again.
Brett Lavallee
5 years ago
Wow I got the first download! Thank you!!