目前本页面只支持英文显示哟

MIDI to note CV

A Block to Convert MIDI notes to Blocks CV

(15 Votes)
0.6 (Updated 10 months ago)
227.9kB
February 05, 2018
Reaktor 6
Blocks User Blocks

DESCRIPTION

Version 0.6:
There was a bug in 0.5 whereby if a sequential note-off and note-on were quantised to the same tick, the note-off was dropped leaving the new note with no gate re-trigger. Now fixed.
--------------------------------

The factory 'Util Note In' Block drops/hangs notes in some circumstances making it unreliable. There doesn't seem to be an easy fix, the problem is a fundamental design issue rather than a coding error.
This Block uses scratch built MIDI handling code and doesn't have the same problems.

It features various modes and controls for portamento and retrigger.

It lacks control over Mod Wheel and Pitch Bend, although those are available as outputs.
Also missing is portamento that doesn't reset when all keys are off.

Any problems, suggestions or feature requests, please post a comment. If it's important, try on the forum for a quicker response.

COMMENTS  (21)

Ronan Smith
1 week ago
Great Post about Tracking Trends. Keep up the good work sir. Thanks for sharing hp error codes
Ronan Smith
1 week ago
Great Post about Tracking Trends. Keep up the good work sir. Thanks for sharing hp error codes
Roger David
3 weeks ago
Thanks for sharing this valuable content with us this work is appreciable and I have bookmarked your website Visit to setup canon mg3500 setup
Roger David
3 weeks ago
Thanks for sharing this valuable content with us this work is appreciable and I have bookmarked your website Visit to setup canon mg3500 setup https://www.canonprintersupport247.com/blog/canon-pixma-mg3500-wireless-printer-setup/
Mia Taylor
1 month ago
Enjoyed reading the article above, really explains everything in detail, the article is very interesting and effective. Thank you and good luck for the upcoming articles. If any issue regarding canon printer error then visit error code 0xc0000185
Robin Greene
1 month ago
Hi there, What an awesome blog have you written, I found this blog very useful. Your blog will be very beneficial for everyone. I have bookmarked your website. Please keep your effort continuous and keep providing us your valuable information and suggestions. Also, visit blog posted by Robin Greene. Dial+18886337151 (Toll-Free) for the USA, and Dial +448081645280 for the UK. https://www.hpsupport365.com/blog/how-to-fix-hp-scanner-error/ Visit Now hpsupport365
kate winfield
1 month ago
Hello,it is a great post.It's been such a wonderful experience while reading your blog.If facing any problem related to printer Call us on toll free no. USA: +1-888-633-7151; UK: +44-808-164-5280 for any technical support assistance and please visit https://www.brotherprintersupport247.com/blog/fix-brother-printer-machine-error-41/
Sophia winfield
1 month ago
Hello, it is a great post. It’s been such a wonderful experience while reading your post .If facing any problem related to printer Call us on toll free no. USA: +1-888-633-7151; UK: +44-808-164-5280 for any technical support assistance and please visit Fix Acer error code 0xc000000f
George Martin
1 month ago
Keep writing such staff which helps readers to evaluate themselves, Thankyou.If you face any issue regarding Email Error then click this link. https://www.contactemailssupport.com/blog/how-to-fix-aol-error-code-50/ And also you can call us on our Toll - Free USA +1-8886337151 UK :+44-808-164-5280
Robin Greene
1 month ago
Hi there, Thanks for this awesome blog with great content, which I found very useful. Your blog will be very beneficial for everyone. I have bookmarked your website. Please keep your effort continuous and keep providing us your valuable information and suggestions. Also, visit blog posted by Robin Greene. Dial+18886337151 (Toll-Free) for the USA, and Dial +448081645280 for the UK. Visit Now hpsupport365
Oliver Kennard
8 months ago
Thanks for making this, only just discovered the 'dropped note' bug in the library Note In block, so happy to have found this alternative, great work!
dom
8 months ago
the moment - when you figure out (not on your own) that the most innocent looking block in your chain doodles hopelessly wrong....thank you guardian angel!
Lukeocyte
10 months ago
Excellent block! Works well and fixes the fundamental issues with the factory Note In block. Indispensable for me and in all of my custom synths now.
Joseph Kelleher
1 year ago
Thank You, Colin Brown.
Colin Brown
1 year ago
Just want to make it clear in case anyone is worried. This Block does not cause crashes. My understanding is that there was a release of Reaktor just prior to the one used to build this that didn't correctly detect ensembles made with a newer Reaktor versions, resulting in crashes. It's not a fault with the Block! just make sure you're not using an old version of Reaktor.
Colin Brown
1 year ago
Hi Steve, crash logs wont help me because I don't have access to Reaktor source code. Best thing to do is start a thread on the Reaktor forum, it's much easier to discuss problems there. When you've done that, I'll do what I can to help you find a solution.
Steve Davis
1 year ago
The Note In Block from Reaktor is super buggy with Note offs and Stuck notes. I really want this to work but on both of my rigs this Midi Note 2 CV.ism crashes Reaktor. I get an error message saying that Reaktor has crashed. I can send you the error messages and crash logs if you think it will help. I'm using this on Reaktor 6 latest version on Window 10 Pro 64bit latest version.
Steve Davis
1 year ago
When I load this block it immediately crashes Reaktor. Any thoughts as to how to fix that?
michael lancaster
1 year ago
Thank you
Philippe Loiseau
1 year ago
OK, interesting, I guess you will follow this so to include MWa and PB ...
Paule
1 year ago
Thank you, Colin.
now