目前本页面只支持英文显示哟

Interface to Doepfer MCV24 Midi/CV converter

Control your MCV24 from Reaktor

(5 Votes)
1.0 (Updated 11 years ago)
8.2kB
March 27, 2008
Reaktor 5 or lower

DESCRIPTION

I built this for my own use. There might be bugs or room for improvement, but this module is a good starting point for controlling a Doefper MCV24 using Reaktor. This module assumes that each input of the MCV24 is "listening" on it's own channel.

For example, my CV1,output5 is set in the MCV24 to:

is trig from: 005
midi channel:5
Mode:LastNote
Mode:Direct
1--->Output05

If you're new to the MCV24, I'd play around with it until you've mastered it BEFORE trying to use it with Reaktor.

COMMENTS  (2)

Donald Baynes
6 years ago
could you make one for a A-192 VMC16/CV-MIDI-Interface
Ryan Dean
11 years ago
Great! I was just thinking to pick one of these up.
now