目前本页面只支持英文显示哟

Step Seq v4.5r

StepSeq

(258 Votes)
20.1 (Updated 5 years ago)
1.9MB
April 19, 2013
Reaktor 5 or lower
Instrument Sequencer

DESCRIPTION

****Requires Reaktor v5.9******
V4
I've added Scaler,harmonizer,tie s, switch seqs and finally managed to make a snapseq that works how i wanted.i've also done a read me explaining whats what.There are still areas that haven't been able to tamed and may result in the odd stuck note.
any problems please report.
As always experiment and enjoy
mike
V4.1r
fixes a problem when used as aplug in ,missing step 1,but i think i've fixed it
V4.2r
Tamed the VR's,so they don't give stuck notes and stop at next on step.
V4.3r
Fixed a few things.less stuck notes.
+midi thru and new groover control and step jump variation
**D/L fixed** and authorising problem sorted…oopps
V4.4r
Fixed a few more things+key monitor

V4.5r
Expanded midi thru and got rid of stuck notes when changing channels.
Added modulation to lfo's
V4.5.1
Fixed a bug in lfo modulation(kept resetting)
The odd tweak

COMMENTS  (51)

Rasmus Jakobsen
10 months ago
To Marcus: As far as I have understood it is a sequencer - so you need to send the MIDI output to something that can make a sound - or add a synth/sampler of some sort inside Reaktor
Marcus Wormald
10 months ago
Am i missing something here? I dont have any sound when I open it...
Todd Silva
4 years ago
For some reason, it was not in my earlier download. Downloaded again, and this one has the read me. Now, off to reading how this bad boy works. Thanks Michael!!
Todd Silva
4 years ago
Hi Michael, you mentioned in the Description that there is a Read Me explaining what's what. Where can I find that?
Todd Silva
4 years ago
Is there a manual for this sequencer, or a description of the sections? Just starting to use it, seems very powerful, but quite confusing at first. Overall, I have a feeling this is a very powerful sequencer! Great job Michael!
Ross Barradel
5 years ago
Great, love it, plays so well with my eurorack. :)
Paule
5 years ago
Downloaded 4.5 - danke schön.
Kimmo Kivelä
5 years ago
!!!
michael lancaster
6 years ago
PS why when i type .ens with out the . does it get "corrected" to end.can i stop it?
michael lancaster
6 years ago
It was down to prism,I'd imported seq into prisms .ens and then deleted prism,but the seq was still with in prisms .ens. there were still prism snapshots in banks, a lesson learned.Glad everything ok now. enjoy+experiment mike
Paule
6 years ago
Thanks for eleminating the disturbing elements - all correct in Reaktor 5.9!
Martin Wood-Mitrovski
6 years ago
This is brilliant, just what I wanted for christmas :)
michael lancaster
6 years ago
I have re-uped the .ens Hopefuly will load up ok now.please let me know if still a problem.
michael lancaster
6 years ago
The only thing i can think thats causing that is i recently bought prism and had been using it as a test synth,I thought i'd deleted it all but maybe there is some of it left somewhere.To make sure I'll double check no prism and resave and upload. sorry mike
Paule
6 years ago
I drive Reaktor 5.9 and when I load your ens Reaktor told me to activate my system. My system is activate since last update to version 5.9 - so I delete you ens from my computer!
michael lancaster
6 years ago
Reaktor is now at 5.9 and the seq requires that version, the new version has taken away limits on how many modules you can use,in my case it has allowed for more modulation destinations,ie more ic sends. the update is free and available on the web site. sorry i should have said mike
R Ben
6 years ago
crashes on me (vst plugin in ableton or reaper under win7 64), telling me i don't have the latest reaktor ver installed although i definitely do have r5.8 installed !
year zero
6 years ago
MetaSequencerX24j -----hmm doesn't work at all.
michael lancaster
6 years ago
Another interesting ens is MetaSequencerX24 which looks very complex and i haven't got my head into it yet and the graphics are a bit asque,but hopefully the engine is good,requires some time i think!
year zero
6 years ago
ahhh, thanks for the info on the repeat/gate functionality... i'll try that arp!
michael lancaster
6 years ago
PS have you tried Koyanaquatsi arp, that looks very vairiable.
michael lancaster
6 years ago
The gate functions change slightly when using the repeat functions.To avoid stuck notes and other midi excentrisitys,i made the repeats devied the gates,so 1 repeat should half gate settings,2 repeats 1/3 gate. this may be where your "moving gate" is coming from.Saddly i don't have ablton to test your problem,I use logic and feed it from a stand alone version of seq,with no sync i just set the tempos the same, then quantize to 1/96 notes and drag all notes forward to the start beat,not ideal but it does work,syncing via midi clock is dread full.several seqs playing multi timbral synths(omnisphere) is great fun.I'm looking into stacked macros next,once i get this snapseq sorted(i'm struggling a bit). All the best
year zero
6 years ago
also, by using arps on different midi channels in ableton live 9, and just one instance of your sequencer, i'm able to achieve stunning results on different instruments. also, hmm. one bug, maybe an ableton bug. the sequencer stops putting out notes if its not visible for some time. and i have to click on the track its on for it to continue..
year zero
6 years ago
at the moment i built an ableton live arp rack with built in midi arps and max4live midi fx and i place my arp rack on separate midi channels after the sequencer chain.... pretty sweet action. i'm curious. i don't use the cc/lfo's on your sequencer. i took them out of the ensemble to have a bare bones sequencer,... but, the sequencer' Gate function keeps moving as though its being lfo'd. thoughts? again..truly love this sequencer!
michael lancaster
6 years ago
once i get the snap seq working how i want i think this will be a finished project(I want to use it)I'm curious as to how you would use an arp to control seq?
year zero
6 years ago
been looking for a sweet reaktor arpeggiator to attach to this, but to no avail yet
year zero
6 years ago
still amazed at the updates! thanks for your continuous work..
michael lancaster
6 years ago
Just to say that if you have any problems with snap seq just switch it off,there are still afew issues with it that I'm trying to sort out.
michael lancaster
6 years ago
I have been having problems with stuck notes when playing thru logic,that didn't seam to be there when playing a synth direct from reaktor. It turns out that logic does not pass "all note off"commands thru.So the kind folk at logic pro help made up a fix for me,it seams to work a treat. If anybody is wanting this fix let me know and i'll post it(if i'm aloud to post logic stuff" mike(who is now putting all his hair back in)
year zero
6 years ago
hell of an update! Randomization!! was waiting for that one! by far my favourite reaktor sequencer. 3 cheers!
michael lancaster
6 years ago
Glad that you like the seq,I know what you mean with vairiable step repeat no.s,but the repeat function is what is causing glitches(I think)so i'm going to have to look at another way and if possible do more repeats.Also in the new snap seq section you can specify different step lengths in steps of 1/16 notes,and i'm wondering what would happen if i made that the master clock for all rows/lanes.But at the moment i'm still trying to get the snap seq to flow better and not give stuck notes occasionally when changing from a mad snap to another mad snap(its usually with lots of fast repeats and changing snap mid seq)Lots to think about.It still does everything else ok and if i can't take it any further,i'm pleased with where i've taken it(further than i ever thought i'd manage) mike
jörg thiele
6 years ago
I like the seq and the features you have implemented. I have a suggestion by the way...... is it possible that you can choose how often a step is repeated like 2, 3, 4...8 per step. that would be a nice feature. thanks for your hard work.
year zero
6 years ago
yay! thanks for fixing the link. standalone ens is perfect!
michael lancaster
6 years ago
Thank you benjamin it all seams to work now although the ens is just Seq with no synth,for the moment.
benjamin kilchhofer
6 years ago
download doesnt work, the link ends with: _StepseqV2..zip maybe this is the problem?
michael lancaster
6 years ago
Still won't work.will try again later
michael lancaster
6 years ago
hmm doesn't work for me,I'll re zip and new name see if that helps
michael lancaster
6 years ago
I have reuploaded hopefully things ok now
year zero
6 years ago
download link still broken. other ens's dl fine. fix por favor.. love the updates!
year zero
6 years ago
um.... download link broken
year zero
6 years ago
nice....tight update. love the gui !! cheers. like i said. keep up the amazing work. i have this mapped to my bcr2000. plenty of knobs!!
michael lancaster
6 years ago
Thanks year zero,glad you like the updates,I'm starting to worry about it becoming "bloatware",but things just get more useful and stable.I want to look at the trigger lanes and see if they can be improved(for switching glide on/off predictably) o and a master on/off switch for when using more than one.I'm basically learning as i go which is why so many updates. mike
year zero
6 years ago
loving the updates !!! thanks again for your efforts!
michael lancaster
6 years ago
Hi Eric I've just had a look at seq with massive,if you load mass ive as an ens then add seq as a inst it syncs fine but when you add massive to the seq ens then there is no sync with massive,odd i have made a sync out for the seq but it needs patched to massive, But i'd like a more elegant solution ie no patching req,i suspect its to do with clock master,i look into it, I haven't had any problems with un responseiveness or the mute buttons recking everything,i am working with reaktor 5.8 so may be thats where the problems lie,Will post a version inc massive patched for sync,oo and watch out for swing/shuffle settings as they can make things out of time with each other ie massive set with a swing beat and seq not,it will sound outa time (sometimes good some times bad)Massive doesn'tseam to be keyboard transposeable so the pitch control won't work,but i did have a control lane controling the transpose function. Also be aware if keyboard transpose is switched on when you first load up it defaults to c-3, so play a note on you keyboard to get a higher pitch(i want to look at that aswell). hope this helps mike
Eric Curkendall
6 years ago
Looks great...it maybe down to my own mental retardation, but I'm not really seeing that it works. I had it start up fine as a controller for Massive...but simply pushing the top button above the first step seemed to render the sequencer inoperative no matter what I did. Reloaded...but same...no response no triggering of Massive. I loaded Spiral in place of updated mono liner and that worked....also it doesn't seem to be fully triggering the internal synth you included especially well. I'm on the latest version of Reaktor, Mac 10.7.5....dunno
year zero
6 years ago
thanks for the update! keep it up!
michael lancaster
6 years ago
I've just discovered a bug when useing the velocity master to add velocity,if a step is muted then it will still play if velocity is added.I know why I've just to sort it. With reguards to scales(hi karel) I'm sure a scaler macro could be added to the output if required
Wolfgang Kroon
6 years ago
very nice.. thank you...
michael lancaster
6 years ago
Thanks for the comments,I'm looking at some reset buttons next,to set lanes back to default rather than double clicking each knob.
year zero
6 years ago
very cool indeed! Thanks
Karel Skakal
6 years ago
Thank you:-) 10+
now